RJA Dispersions PM Acetate

D1100 series are dispersions in PM Acetate (CAS Number 108-65-6, EC Number 203-603-9), resin free, for solvent-based inks and coatings. These dispersions are usually at 30% pigment loading except for the white which contains 50% white by weight. D1100 dispersion have a flashpoint of 110F and are shipped by ground. The approved dispersions are listed below with brief descriptions, typical viscosities (cps at 25 C), and typical mean particle size (nM). These values are typical but should not be considered as specifications. The formulas have been qualified after 8 weeks of heat stablity testing. The testing is done in PM Acetate. Some vehicles, vehicle additives, and othe solvents can interfere with stability. If these dispersions are not stable in your system, feel free to contact us to develop a dipersion for your system.

D1100 Series in PM Acetate​

  • Product
    Brief Description
    Typical Viscosity (cps, 25 C)
    Typical Mean Particle Size (nM)
  • D1110-B15:4
    35% PB 15:4
    soft paste*
    140
  • D1110-B60
    30% PB 60
    soft paste*
    160
  • D1110-K
    30% PBl 7
    140
    90
  • D1110-M
    30% Quinacridone Magenta (as in D1010-M)
    2000
    145
  • D1110-V55
    30% PV 55
    200
    140
  • D1110-Y139
    30% PY 139
    330
    105
  • D1110-W6
    50% White
    300
    250
  • D1120-Y120
    30% PY 120
    300
    250

Other dispersions available upon request. *The dispersions are very stable when let down to around 5% pigment in a vehicle.

Category: